現在很多企業缺乏對濟南印刷膠帶的技術知識，所以在購買膠帶時很容易被帶入誤區，并且由于自身的想象力，容易造成企業偷工減料。因此，企業在選擇包裝印刷膠帶時應了解什么？

At present, many enterprises lack the technical knowledge of Jinan printing tape, so it is easy to be misled when purchasing tape, and because of their own imagination, it is easy to cause enterprises to cut corners. Therefore, what should enterprises know when choosing packaging printing tape?

一，聞一聞味道。如果味道很濃，有酸味，這種膠帶的持力很差。特別是在低溫環境下，基本貼在紙箱上就會開裂。味道濃的時候，起初的粘著力還是很粘的，但是粘著面很快就會干，失去粘著性。當時膠帶表面有裂紋。因?yàn)橥磕z不均勻。

1、 Smell the smell. If the taste is strong and sour, the adhesive tape has poor holding power. Especially in the low temperature environment, basically sticking on the carton will crack. When the taste is strong, the initial adhesion is still very sticky, but the adhesive surface will soon dry and lose adhesion. There were cracks on the surface of the tape. Because the glue is not evenly applied.

二，看片子的亮度。一般劣質膠帶顏色較深，破損幾率非常高，強度差。

2、 Look at the brightness of the film. Generally, the color of inferior tape is dark, the probability of damage is very high, and the strength is poor.

三、手感膜的厚度，手感硬的膠帶一般都是劣質的，而且因?yàn)槟さ暮穸龋瑢?shí)際米數會減少。

3、 The thickness of the felt film and the hard felt adhesive tape are generally inferior, and the actual number of meters will decrease because of the thickness of the film.

四，看顏色。一般印刷膠帶帶越白，膠帶中的雜質越少，就能保證正常的粘合性。100米以下的膠帶有一定的透明度，可以看到紙管。黃色膠帶，看膠帶表面是否有不規則的白斑。不能用手擦掉的是雜質或干膠的印記。這種產品一般都有氣味。

4、 Look at the color. Generally, the whiter the printing tape, the less impurities in the tape, and the normal adhesion can be guaranteed. The tape below 100 meters has certain transparency, and the paper tube can be seen. Yellow tape, see if there are irregular white spots on the surface of the tape. Impurities or dry glue marks cannot be wiped off by hand. This product generally has an odor.

五.看松緊度，印刷膠帶在從半成品到成品的過程中，由機器卷成條狀，有一定的張力。張力大的話，會把膠帶卷得很緊，要按照套路把膠帶卷整齊。這種膠帶沒有縫隙，膠水和空氣的粘合程度小，可以延長膠帶的保質期，更大程度上保持膠帶的附著力。另外，對于劣質膠帶，由于含有雜質，所以涂層不均勻，卷成成品后當時不會有問題，但稍長一點時間后就會開始出現裂紋。

5、 According to the tightness, the printing tape is rolled into strips by the machine during the process from semi-finished products to finished products, with a certain tension. If the tension is large, the tape will be rolled tightly, and the tape should be rolled neatly according to the routine. This kind of adhesive tape has no gap, and the adhesive between glue and air is small, which can extend the shelf life of the adhesive tape and maintain the adhesive force of the adhesive tape to a greater extent. In addition, the coating of inferior tape is uneven due to impurities. There will be no problem when it is rolled into finished product, but cracks will appear after a little time.

如果使用的打印帶粘合不牢，就會斷裂，造成貨物在運輸過程中的丟失和損壞，影響正常銷售。如果打印帶壞了，會影響人們的使用。其實會出現這種現象是因?yàn)樯a(chǎn)出來的產品厚度比較薄，使用后要及時標記。避免使用過程中出現斷裂現象。為了減少這種情況的發生，在使用過程中應該避免一些問題。您可以來我們網站http://www.673338.com.cn做咨詢！

If the printing belt used is not firmly bonded, it will break, causing loss and damage of goods during transportation, and affecting normal sales. If the print tape is broken, it will affect people's use. In fact, this phenomenon occurs because the thickness of the products produced is relatively thin, and they should be marked in time after use. Avoid breakage during use. In order to reduce this situation, some problems should be avoided during use. You can come to our website http://www.673338.com.cn Consulting!