正確使用抗靜電塑料袋的方法

隨著電子行業的日益發展，靜電已經成為一個頗為頭痛的問題。對于那些極度敏感的電子元件，即使是微弱的靜電都會對它們的性能產生負面影響。因此，在電子行業內，抗靜電塑料袋的使用顯得更加必要和不可忽視。

With the increasing development of the electronics industry, static electricity has become a headache. For extremely sensitive electronic components, even weak static electricity can have a negative impact on their performance. Therefore, in the electronics industry, the use of anti-static plastic bags is more necessary and cannot be ignored.

1、在平整、清潔且無靜電的桌面上打開抗靜電塑料袋，取出所需包裝的電子元件或器件。在取用時應當用防靜電手套，避免手部靜電對于元器件造成負

1. Open the anti-static plastic bag on a flat, clean, and static free desktop, and remove the electronic components or devices that need to be packaged. When using, anti-static gloves should be used to avoid hand static electricity causing negative effects on the components

面影響

Surface influence

2、將電子元件或器件分別放入單個的抗靜電塑料袋內。保證每件物品的單獨包裝，避免不同元件之間的摩擦，產生電荷。

2. Put electronic components or devices separately into individual anti-static plastic bags. Ensure that each item is individually packaged to avoid friction between different components and the generation of electric charges.

3、在抗靜電塑料袋內放置干燥劑。由于電子元件極易受潮、受潮后難以修復，因此在包裝時應當放置干燥劑保持干燥。

3. Place desiccant inside anti-static plastic bags. Due to the high susceptibility of electronic components to moisture and difficulty in repairing them, desiccants should be placed to keep them dry during packaging.

4、在包裝完畢后，將包裝好的抗靜電塑料袋封緊。建議使用的防靜電封口機完成封口，封口完畢后應當及時進行檢驗，確保質量。

4. After packaging, seal the pre packaged anti-static plastic bag tightly. It is recommended to use a professional anti-static sealing machine to complete the sealing. After sealing, it should be inspected in a timely manner to ensure quality.

5、在運輸過程中，應該保持抗靜電塑料袋的完整性。盡量避免摩擦、擠壓等行為，以免產生靜電干擾。

5. During transportation, the integrity of anti-static plastic bags should be maintained. Try to avoid friction, squeezing, and other behaviors to avoid static interference.

6、運輸過程結束后，應當在靜電平衡環境下打開抗靜電塑料袋。打開后，應當避免直接接觸電子元件，以免造成靜電干擾或損壞元件。

6. After the transportation process is completed, the anti-static plastic bag should be opened in an electrostatic balance environment. After opening, direct contact with electronic components should be avoided to avoid static interference or damage to the components.

總之，抗靜電塑料袋是一種非常有效的保護電子元器件免受靜電干擾的工具，但只有當它被正確使用時才能發揮作用。

In short, anti-static plastic bags are a very effective tool for protecting electronic components from static interference, but they can only be effective when used correctly.