氣泡袋的泡徑和厚度對其質量的影響

氣泡袋的泡徑和厚度是其重要的技術參數，影響著氣泡袋的抗壓能力和使用效果。

The diameter and thickness of the bubble bag are important technical parameters, which affect the compression resistance and effectiveness of the bubble bag.

泡徑，即氣泡的直徑，常見的規格有6mm、10mm、20mm和28mm等。其中，10mm的泡徑為常見，具有廣泛的抗壓范圍。6mm的泡徑氣泡看起來整齊美觀，特別適合與電話等外包裝產品搭配，主要用于耐磨和皮帶減震。而20~28mm的泡徑則屬于大泡，其薄膜的厚度會更厚，因此減震效果更好。

Bubble diameter, also known as the diameter of bubbles, is commonly specified as 6mm, 10mm, 20mm, and 28mm. Among them, a foam diameter of 10mm is common and has a wide compressive range. The 6mm bubble diameter looks neat and beautiful, especially suitable for pairing with external packaging products such as telephones, mainly used for wear resistance and belt shock absorption. However, bubbles with a diameter of 20-28mm belong to large bubbles, and their thin film thickness will be thicker, resulting in better shock absorption effect.

氣泡袋的泡徑和厚度對其質量的影響

The influence of bubble diameter and thickness on the quality of bubble bags

厚度則是指氣泡袋薄膜的厚度，一般用每多少克來表示，類似于A4紙的克重。對于不同泡徑的氣泡袋，其厚度也有所不同。例如，10mm泡徑的氣泡袋，其厚度通常在35克/到100克/之間，也可以做得更厚，但成本會相應增加。6mm泡徑的氣泡袋，其厚度也基本在35克/到100克/之間，而根據經驗，50~70克/的厚度對于這種小氣泡來說較為合適。對于20~28mm的大泡徑氣泡袋，其厚度通常在100克/到200克/之間，常用的是200克/，這是因為泡徑較大，如果厚度太薄，容易破裂。

Thickness refers to the thickness of the bubble bag film, usually expressed in grams per square meter, similar to the weight of A4 paper. The thickness of bubble bags varies for different bubble diameters. For example, a bubble bag with a diameter of 10mm typically has a thickness between 35 grams per square meter and 100 grams per square meter, and can also be made thicker, but the cost will increase accordingly. A bubble bag with a diameter of 6mm also has a thickness ranging from 35 grams per square meter to 100 grams per square meter. Based on experience, a thickness of 50-70 grams per square meter is more suitable for this type of small bubble. For large bubble bags with a diameter of 20-28mm, their thickness is usually between 100g/square meter and 200g/square meter, with the commonly used one being 200g/square meter. This is because the bubble diameter is large, and if the thickness is too thin, it is easy to break.